Kim, D., Kim, S., and Lim, B., (1998) \u201cSurface Hardening Characteristics on Plasma Carburized SCM415 Steel,\u201d Journal of Korea Research Society of Materials, Vol. 8, No. 8, pp. 707-713. (In Korean)<\/li>\n<\/ol>\n <\/p>\n
Refereed Conference Papers <\/u><\/strong><\/p>\n\n- Khawarizmi, R., Kwon, P., Sayem, M. A., Han, Y., Kim, D., (2021) \u201cThe effect of carbon fiver types on tool wear during edge trimming of 0\u00b0, 45\u00b0, 90\u00b0, and 135\u00b0 carbon fiber reinforced plastic laminates,\u201d Proceedings of the ASME 2021 16th International Manufacturing Science and Engineering Conference (MSEC2021).<\/li>\n
- Riley, C., Kim, D., Lulay, K., Lynch, J., StClair, S., (2021) \u201cInvestigating the Effect of Engineering Undergraduates\u2019 Writing Transfer Modes on Lab Report Writing in Entry-Level Engineering Lab Courses,\u201d Proceedings of 2021 ASEE Annual Conference and Exhibitions.<\/li>\n
- StClair, S., Kim, D., Riley, C., (2021) \u201cUndergraduates\u2019 Perspectives on Readiness, Writing Transfer, and Effectiveness of Writing Instructions in Engineering Lab Report Writing,\u201d Proceedings of 2021 ASEE Annual Conference and Exhibitions.<\/li>\n
- Kim, D., Frye, M., Olson, W., (2021) \u201cMultidimensional Linguistic Analysis of Multiple Undergraduate Writing Samples Collected from Engineering Students in Entry-Level Laboratory Courses at Three Universities,\u201d Proceedings of 2021 ASEE Annual Conference and Exhibitions.<\/li>\n<\/ol>\n
\n- Roy, S., Dey, M., Tan, H., Kim, D., Shultz, M., Elliott, A., Echols, D., (2021) \u201cPerliminary Finite Element Simulations on the Residual Stress Fields and Fatigue Performance of the Cold Expansion Processed Rail Hole in the Rail Joint Structure,\u201d AREMA 2021 Annual Conference & Expo.<\/li>\n
- Dey, M., Kim, D., Tan, H., (2020) \u201cEffect of friction on residual stress distribution induced by the split sleeve cold expansion process,\u201d Proceedings of the ASME 2020 International Mechanical Engineering Congress and Exposition (IMECE2020), November 15-19, 2020, Portland, Oregon, USA.<\/li>\n
- Yasin, Md. S., Kim, D., Tan, H., Shultz, M., Elliott, A., Echols, D., (2020) \u201cFatigue enhancement technologies to extend the life of rail-end bolt holes evaluated through simulation technologies to predict fatigue failure and verified through laboratory testing,\u201d AREMA 2020 Annual Conference & Expo.<\/li>\n
- Kim, D., Lynch, J., (2020) \u201cPerspectives and practices of undergraduate\/graduate teaching assistants on of writing pedagogical knowledge and lab report evaluation in engineering laboratory courses.\u201d Proceedings of 2020 ASEE Annual Conference and Exhibitions.<\/li>\n
- Bin Abdullah, Md. S., Nguyen, D., Kim, D. (2020) \u201cA study of cutting edge geometry change and surface roughness in drilling of carbon fiber reinforced plastics (CFRP) using uncoated and coated tools,\u201d Proceedings of 2020 SAMPE Conference.<\/li>\n
- Kim, D., Riley, C., Lulay, K., (2019) \u201cPreliminary investigation of undergraduate students\u2019 zone of proximal development (ZPD) in writing lab reports in entry-level engineering laboratory courses at three universities,\u201d The Proceedings of 2019 ASEE Annual Conference and Exposition, Tempa, FL, June 2019. Best Paper Award of the ASEE Division of Experimentation and Laboratory-Oriented Studies<\/em><\/li>\n
- Kim, J., Kim, D., (2019) \u201cHow engineering students draw conclusions from lab reports and design project reports at junior-level engineering courses,\u201d The Proceedings of 2019 ASEE Annual Conference and Exposition, Tempa, FL, June 2019.<\/li>\n
- Nguyen, D., Voznyuk, V., Bin Abdullah, M. S., Kim, D., Kwon, P., (2019) \u201cTool wear of superhard ceramic coated tools in drilling of CFRP\/Ti stacks,\u201d The Proceedings of ASME Manufacturing Science and Engineering Conference MSEC 2019, Erie, PA.<\/em><\/li>\n
- Swan, S., Jones, J., Kim, D., Nguyen, D., Kwon, P., (2018) \u201cTool wear of advanced coated tools in drilling of CFRP,\u201d The Proceedings of ASME Manufacturing Science and Engineering Conference MSEC 2018, College Station, TX.<\/li>\n
- Nguyen D., V. Voznyuk, P. Kwon, D. Kim. (2017) \u201cPerformance Evaluation of Superhard Coatings in Drilling of Ti-6Al-4V Alloy,\u201d The Proceedings of ASME Manufacturing Science and Engineering Conference MSEC 2017, Los Angeles, CA.<\/li>\n
- Kim D., W. Olson, K. Wandro, N. Sundararajan, O. Adesope. (2017) Professional development workshop to promote writing transfer between first-year composition and introductory engineering laboratory courses. The Proceedings of 2017 ASEE Annual Conference and Exposition, Columbus, Ohio, June 2017.<\/li>\n
- Kwon, P., Swan, S., & Kim, D. (2016). Early stage of tool wear with superhard ceramic coated tools in drilling CFRP, Ti, and CFRP\/Ti stacks. The Proceedings of SME NAMRC 44, 2016.<\/li>\n
- Kim, D., Sekhar, P.K. (2016). A Preliminary Study on Supporting Writing Transfer in an Introductory Engineering Laboratory Course. The Proceedings of 2016 ASEE Annual Conference and Exhibition, New Orleans, LA, 2016.<\/li>\n
- Garate, J., Kim, D., Solovitz, S., (2015) \u201cA Preliminary Study on Glass Fiber Reinforced Thermoplastic Composite Fabrication for Small Wind Turbine Blade,\u201d Proceedings of ASME-IMECE 2015, Houston, TX, USA. 2015.<\/li>\n
- Kim, D., and Olson, W.M. (2015) Improving student lab report writing performances in materials and manufacturing laboratory courses by implementing a rhetorical approach to writing.\u00a0 Proceedings of 2015 ASEE Annual Conference and Exhibition, June 14 – 17, 2015, Seattle, WA. 2015.<\/li>\n
- Kim D., A. Beal, P. Kwon. (2015) \u201cEffect of Tool Wear on Hole Quality in Drilling of Carbon Fiber Reinforced Plastic-Titanium Stacks Using Tungsten Carbide and PCD Tools,\u201d ASME 2015 International Manufacturing Science and Engineering Conference, Charlotte, NC, USA, June 8-12, 2015.<\/li>\n
- Yuksel, T., Stockton, D., Marshall, P., Gurocak, H., and Kim, D., (2014) \u201cIntelligent resin delivery system development large composite structure manufacturing,\u201d Proceedings of ASME-IMECE 2014, Nov 14-20, 2014, Montreal, Canada. 2014.<\/li>\n
- Wang, X., Kwon, P., Pelikhatyy, R. , Kim, D., (2014) \u201cCharacterization Of Fiber Pull-Outs In Drilled CFRP Holes Using Confocal Laser Microscope,\u201d Proceedings of North American Manufacturing Research Institute 42, Detroit, MI. 2014.<\/li>\n
- Sturtevant, C., Wang, X., Kim, D., Kwon, P., Lantrip, J., (2013) \u201cEffect of tool wear on hole quality when drilling CFRP with coated tools,\u201d Proceedings of North American Manufacturing Research Institute 41, Madison, WI, June 10-14, 2013.<\/li>\n
- Lei, N., Chen, Z., Kim, D., Xue, W., & Xu, J. (2012) Mechanical fabrication of graphene devices using focused-ion beam: deposition and milling.\u00a0 Nanotech Conference & Expo 2012 (Nanotech 2012), pp 502-505, 2012.<\/li>\n
- Wang, X., Kwon, P., Kim, D., & Sturtevant, C. (2012) Tool Wear of Ultra-Hard Coatings in Drilling CFRP. Proceedings of North American Manufacturing Research Institute 40, South Bend, IN, June 3-8, 2012.<\/li>\n
- Kim, S., Seok, C., and Kim, D. (2011) A Study of Failure Criterion for Plain Woven CFRP Composites Structure having a Hole Notch.\u00a0 Proceedings of International Conference on Materials and \u00a0\u00a0 Reliability 2011(ICMR-2011), Busan, Korea, Nov. 20-22, 2011.<\/li>\n
- Kim, S., Seok, C., and Kim, D. (2011) A Study on Variation of Residual Strength of Carbon Fiber Reinforced Plastic Composites with a Hole under Tensile Fatigue Loading.\u00a0 Proceedings of International Conference on Materials and Reliability 2011(ICMR-2011), Busan, Korea, Nov. 20-22, 2011.<\/li>\n
- Kim D., A. Beal, K. Park, P. Kwon, J. Lantrip. (2011) A Comparative Study of Carbide Tools In Drilling Of CFRP And CFRP-TI Stacks. ASME 2011 International Manufacturing Science and Engineering Conference, Corvallis, OR, USA, June 13-17, 2011.<\/li>\n
- Li P., W. Xue, D. Kim, Y. Park. (2011) A Preliminary Study On Machinability Of Polymethylmethacrylate(PMMA)\/Multi-Walled Carbon Nanotube(MWCNT) Nanocomposites In Focused Ion Beam Micromachining. ASME 2011 International Manufacturing Science and Engineering Conference, Corvallis, OR, USA, June 13-17, 2011.<\/li>\n
- Kim Y., Jang, J., Kim, D., T. Nam. (2011) Prediction of crack initiation and crack growth of the split sleeve processed holes in aluminum 2024-T3 using the finite element method. SAMPE Conference 2011, Long Beach, CA, USA, May 23-26, 2011.<\/li>\n
- Beal A., Kim, D., Park, K-H, Kwon, P., Lantrip, J. (2010) Tool wear and hole quality in drilling of composite\/titanium stacks with carbide and PCD tools. Proceedings of SAE 2010 Aerospace Manufacturing and Automated Fastening Conference.<\/li>\n
- Castro G., Kim, D., Kwon. P. (2010) Influence of tool wear on hole quality in drilling of carbon fiber reinforced plastic-titanium stacks. Proceedings of SAMPE\u201910 Seattle 2010.<\/li>\n
- Beavers K., D. Hennigan, D. Kim. (2010) Effect of consolidation processes on mechanical properties of marine composites. Proceedings of SAMPE \u201910 Seattle 2010.<\/li>\n
- Kim D., Li, W., Wogen T.. Biomedical Manufacturing in the Undergraduate Manufacturing\/Mechanical Engineering Programs. (2010) Proceedings of 2010 ASEE Annual Conference.<\/li>\n
- Kim D., Nam, T., Jang, J., Cho, M. (2010) Numerical and experimental study to predict crack initiation and crack growth of the split sleeve processed holes in aluminum 2024-T3. 2010. Proceedings of 2010 Aircraft Airworthiness and Sustainment (AA&S) Conference. Austin, TX, USA.<\/li>\n
- Bhat, A., Bloomquist, C., Ahn, J., Kim, Y., & Kim, D. (2009). Thermal Transpiration Based Micro-Scale Pumping and Power Generation Devices. The 7th International Energy Conversion Engineering Conference and Exhibit (IECEC) The 7th International Energy Conversion Engineering Conference and Exhibit (IECEC), Denver, CO. https:\/\/www.aiaa.org\/content.cfm<\/a>?pageid=230&lumeetingid=1894.<\/li>\n
- Kim, D., & Kim, Y. (2009). Hands-on Plastic Processing for a Lean Manufacturing Project. Proceedings of ASEE Annual Conference 2009<\/li>\n
- Chen, X., & Kim, D. (2009). Implementing the Design and Manufacturing Track in a Mechanical Engineering Program. Proceedings of 2009 ASEE Annual Conference and Exhibition<\/li>\n
- Gurocak, B.H., Chen, X., Jokar, A., & Kim, D. (2009). Assessment of Program Outcomes for ABET Accreditation. Proceedings of 2009 ASEE Conference and Exhibition. Honorable Mention<\/em><\/li>\n
- Kim, D., Shin, S., Jang, J. , (2008) \u201cThe Effect of Personality Type on Team Performance in Engineering Materials Term Projects,\u201d Proceedings of ASEE 2008 Annual Conference and Exposition, June 22-25, 2008, Pittsburgh, PA.<\/li>\n
- Wan, Y., Kim, D., Jang, J. , Park, Y., (2007) \u201cMicro Electrical Discharge Machining of CNT-Based Nanocomposite Materials,\u201d Proceedings of ASME-IMECE, November 11-15, 2007, Seattle, WA.<\/li>\n
- Jang, J. , Kim, D., Cho, M., (2007) \u201cThe Effect of Cold Expansion on the Fatigue Life of the Chamfered Holes,\u201d the Proceedings of ASME-IMECE, November 11-15, 2007, Seattle, WA.<\/li>\n
- Kim, D., Jang, J. , Ramulu, M., (2007) \u201cHole Quality in Drilling of Hybrid Titanium Composite Laminate(HTCL),\u201d Proceedings of the American Society for Composites\u2014Twenty-Second Technical Conference, September 17-19, 2007. Seattle, WA.<\/li>\n
- Park, Y., Kim, D., Wan, Y., Zhang, C., Cook, Y., (2007) \u201cMicro Electrical Discharge Machining of Polymer\/Carbon Nanotube Composites,\u201d Proceedings of SAMPE 2007 Spring Conference, June 3-7, 2007, Baltimore, Maryland.<\/li>\n
- Kim, D., Gurocak, B.H., (2007) \u201cDesign Panel: A Tool for Assessment in Design Courses,\u201d Proceedings of ASEE 2007 Annual Conference and Exposition, June 24-27, 2007, Honolulu, HI.<\/li>\n
- Kim, D., Flaman, M., (2007) \u201cImplementing Machining of Fiber Reinforced Polymer Composites to Manufacturing Courses in 2 Year and 4 Year Programs,\u201d Proceedings of ASEE 2007 Annual Conference and Exposition, June 24-27, 2007,Honolulu, HI.<\/li>\n
- Jokar, A., Gurocak, B.H., Kim, D., Chen, X., Rad, H., (2007) \u201cMulti-Dimensional and Interactive Learning Model for Introduction to Mechanical Engineering,\u201d Proceedings of ASEE 2007 Annual Conference and Exposition, June 24-27, 2007, Honolulu, HI.<\/li>\n
- Kim, M., Kim, D., Lim, B., (2006) \u201cFatigue Life Improvement by Cold Working in Steel Resistant Spot Welds for Automotive Body Applications,\u201d Proceedings of Korean Society of Automotive Engineers 2006 Spring Conference (In Korean).<\/li>\n
- Kim, D., Blake, D., Ryu, S., Lim, B., (2006) \u201cA Study on Fatigue Strength Evaluation in Aluminum Spot Welds by Cold Working,\u201d Proceedings of International Conference on Processing and Manufacturing of Advanced Materials, July 4-8, 2006, Vancouver, Canada.<\/li>\n
- Kim, D., Jewett, J., (2006) \u201cCollaborative Class Projects between the Manufacturing Engineering Program and the Child Development Program,\u201d Proceedings of 2006 Society of American Engineering Education Annual Conference & Exposition, Chicago, IL.<\/li>\n
- Kim, B., Ryu, S., Lim, B., Kim, D., (2005) \u201cStudy of Fatigue Behavior in Post-Weld Cold Worked Aluminum Spot Welds\u201d Proceedings of Korean Society of Automotive Engineers 2005 Fall Conference (In Korean).<\/li>\n
- Kim, D., Ramulu, M., (2005) \u201cStudy on the Drilling of Titanium\/Graphite Hybrid Composites,\u201d Proceedings of ASME IMECE 2005, November 5-11, 2005, Orlando, FL.<\/li>\n
- Allen, P., Chen, X., Kim, D. (2005) \u201cNumerical and Experimental Study on Micro-Electrical Discharge Micromachining Characteristics on Molybdenum,\u201d Proceedings of ASME IMECE 2005, November 5-11, 2005, Orlando, FL.<\/li>\n
- Kim, D., Ramulu, M., (2005) \u201cCutting and Drilling Characteristics of Hybrid Titanium Composite Laminate (HTCL)\u201d Proceedings of SAMPE 2005\/Seattle, October 31-November 3, Seattle, Washington.<\/li>\n
- Ramulu, M., Parafitt, L.C., Stickler, P. B. and Kim, D., (2005) \u201cInfluence of Manufacturing Process and Fiber Volume on Edge Finishing Characteristics and Surface Integrity of Glass Fiber Reinforced Plastic Composites,\u201d Proceedings of SAMPE 2005, October 31-November 3, Seattle, Washington.<\/li>\n
- Lim, B, Ryu, S., Kim, D.,(2005) \u201cImprovement of Fatigue Strength in Al Alloy Spot-welds by Cold Working,\u201d Proceedings of the 13th International Pacific Conference on Automobile Engineers 2005.<\/li>\n
- Kim, D., Chen, X., Gurocak, H., (2005) \u201cOutreach Program with Summer Camps and Engineering Workshops,\u201d Proceedings of 2005 Society of American Engineering Education Annual Conference & Exposition, Portland, OR.<\/li>\n
- Kim, D., Stoebe, T., Cossette, I., (2005) \u201cManufacturing Technology Curriculum Research and Development for High Schools and Colleges in Washington State,\u201d Proceedings of 2005 Society of American Engineering Education Annual Conference & Exposition, Portland, OR.<\/li>\n
- Flinn, B., Spitsen, R., Kim, D., Nam, T., Easterbrook, E.T., (2005) \u201cFatigue Strength Improvement of Low Carbon Steel Resistance Spot Welds by the StressWaveTM<\/sup> Process,\u201d SAE Technical Paper 2005-01-0903.<\/li>\n
- Spitsen, R., Kim, D., Flinn, B., Ramulu, M., and Easterbrook, E.T., (2004) \u201cThe Effects of Post-Weld Cold Working Processes on the Fatigue Strength of Low Carbon Steel Resistance Spot Welds,\u201d Proceedings of ASME IMECE 2004, November 13-19, 2004, Anaheim, CA.<\/li>\n
- Ramulu, M., Stickler, P., Kim, D. (2004) \u201cInfluence of Manufacturing Process and Fiber Volume in Edge Finishing Characteristics of GFRP Composites,\u201d Proceedings of 11th US-Japan Conference on Composite Materials, September 9-11, 2004, Yamagata University, Yonezawa, Yamagata, Japan.<\/li>\n
- Kim, D. and Cossette, I., (2004) \u201cAn Outreach Program to Promote Manufacturing Careers to Underrepresented Students,\u201d Proceedings of 2004 American Engineering Education Annual Conference & Exposition, Salt Lake City, UT.<\/li>\n
- Seo, Y.W., Kim, D., and Ramulu, M., (2003) \u201cAbrasive Waterjet Machined Surface Characteristics of Titanium Alloy (Ti6Al6V),\u201d Proceedings of the 7th Pacific Rim International Conference on Water Jetting Technology, pp. 331-340, 2003.<\/li>\n
- Kim, D., Ramulu, M., (2002) \u201cProcess Optimization on the Drilling of Composite and Titanium Stacks,\u201d Proceedings of ESDA2002: 6th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, July 8-11, 2002.<\/li>\n
- Kim, D., Ramulu, M., (2002) \u201cEffects of Processing Methods on the Drilling Performance of PIXA-M Thermoplastic Composites,\u201d Proceedings of ESDA2002: 6th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, July 8-11, 2002.<\/li>\n
- Kim, D., Ramulu, M., and Garbini, J., (2001) \u201cHole Quality in Drilling of Graphite\/Bismaleimide-Titanium Stacks,\u201d Proceedings of the 33rd International SAMPE Technical Conference, pp. 1315-1326, 2001.<\/li>\n
- Ramulu, M., Branson, T. and Kim, D., (2000) \u201cAn Investigation on the Drilling of Graphite \/ Bismaleimide Composite and Titanium Stacks,\u201d Proceedings of ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, Nov. 5 – 10, 2000.<\/li>\n
- Kim, D., Kim, H., Kim, M., and Lim, B., (1999) \u201cPlasma and Vacuum Carburizing Process and Mechanical Properties of SCM415 Steel,\u201d Proceedings of the 10th International Pacific Conference on Automobile Engineers, Vol.1, pp. 31-36, 1999.<\/li>\n
- Kim, D., Lim, B., (1998) \u201cSurface Hardening Characteristics on Plasma Carburized SCM415 Steel,\u201d Proceedings of Korea Research Society of Materials \u201998 Spring Conference, Vol. 1, p. 34, 1998. (In Korean)<\/li>\n
- Kim, D., Lee, Y., and Lim, B., (1998) \u201cA Study on Mechanical Properties of Vacuum Carburized SCM415 Steel,\u201d Proceedings of Korea Society of Automobile Engineers \u201998 Spring Conference, Vol. 2, 743-748, 1998. (In Korean)<\/li>\n<\/ol>\n
<\/p>\n
Refereed Conference Abstracts\/Presentations<\/u><\/strong><\/p>\n\n- Han, Y., Kim, D., (2020) Influences of the Mechanical Properties of Carbon Fibers on Tool Wear of Tungsten Carbide End Mills in the Edge Trimming Process of Carbon Fiber Reinforced Plastic (CFRP) Laminates, ASME IMECE Conference, Portland, OR, 2020.<\/li>\n
- Avhad, A., Tan, H. and Kim, D. (2017) Importance of Powder Droplet Interaction in the Additive Manufacturing via High Speed Sintering, ASME Manufacturing Science and Engineering Conference. Los Angeles, CA, 2017.<\/li>\n
- Olson, W.M., & Kim, D. (2017). Addressing Transfer Conditions across Disciplines: Cultivating Connections from First-Year Composition to Upper-Division Engineering Laboratory Courses. Conference on College Composition and Communication: Portland, OR, March 2017.<\/li>\n
- Kim, J. H., Kim, D.-W. (2017) \u201cIntegrating collaborative writing in an engineering class.\u201d ASEE Pacific Northwest Section Conference, Seattle, WA, 2017.<\/li>\n
- Swan, S., & Kim, D. (2016). Investigation of Advanced Hard Coatings for the Protection of Cemented Carbides in Drilling CFRP-Ti Stacks.\u00a0 SME AeroDef Manufacturing, Long Beach, CA, Feb. 8-10, 2016.<\/li>\n
- Hurst, A., Tan, H., & Kim, D. (2016). A preliminary study on inkjet-based high-speed sintering 3D printing for a polymeric material.\u00a0 SAE International AeroMat 2016 Conference, Bellevue, WA, 2016.<\/li>\n
- Kim, D. (2016). A Preliminary study on the effect of drill geometry on the surface quality of CFRP holes. SAE International AeroMat 2016 Conference, Bellevue, WA, 2016.<\/li>\n
- Olson, W., and Kim, D. (2016). Connecting the Curriculum: Designing WID Programs for the 21st<\/sup> Century. Panel: Beyond Transfer: Difference, Inclusion, and WAC\/WID in the 21st<\/sup> Century. International Writing across the Curriculum Conference: Ann Arbor, MI, June 2016.<\/li>\n
- Kim, D. (2016). Crossing the Threshold by Supporting Writing Transfer in Introductory Engineering Laboratories.\u00a0 NSF Symposium-Envisioning the Future of Undergraduate STEM Education: Research and Practice on April 27-29, 2016 in Washington, DC.<\/li>\n
- Alizadeh Ashrafi, S., Kim, D., (2015) \u201cFiber pull-out characterization in drilling of carbon fiber reinforced composites,\u201d the AeroMat 2015, Long Beach, CA, 2015.<\/li>\n
- Garate, J., Kim, D., and Solovitz, S., (2015) \u201cA Preliminary Study on Glass Fiber Reinforced Thermoplastic Composite Fabrication for Small Wind Turbine Blade,\u201d the AeroMat 2015, Long Beach, CA, 2015.<\/li>\n
- Olson, W.M., Kim, D., (2015) \u201cTaking Chances: An Interdisciplinary Study on Far Transfer Practices of Engineering Students.\u201d Panel: Risking Writing Knowledge: Investigating Writing Transfer Across the Curriculum and in the Disciplines.\u00a0 Conference on College Composition and Communication: Tampa, FL, March 2015. (Acceptance rate: ~30%<\/em>)<\/li>\n
- Alizadeh Ashrafi, S., Stockton, D., and Kim, D., (2014) \u201cMulti-scale measures on hole quality in the drilled CFRP holes,\u201d Proceedings of ASME-IMECE 2014, Nov 14-20, 2014, Montreal, Canada.<\/li>\n
- Yuksel, T., Stockton, D., Marshall, P., Gurocak, H., Kim, D., (2014) \u201cPreliminary study on developing an intelligent resin delivery system for manufacturing large composite structure,\u201d Proceedings of International Symposium on Green Manufacturing and Applications (ISGMA 2014), June 24-28, 2014, Pusan, Korea.<\/li>\n
- Solovitz, S., Kim, D., & Ogden, D. (2012) \u201cExperimental Investigation of Vent Evolution for High-speed Jets.\u201d AGU Fall Meeting, San Francisco, CA. 2012 (Technical report V11B-2751).<\/li>\n
- Solovitz, S., Kim, D., & Ogden, D. (2012) \u201cEvolution of Vent Geometry for High-speed Jets.\u201d ASME IMECE, Houston, TX 2012. (Technical report IMECE 2012-88292).<\/li>\n
- Kim, S., Kim, D., He, B. (2012) Influence of Interference-Fit Techniques on Bearing Strength Properties of Pin-Loaded Carbon Fiber Reinforced Plastics (CFRP) Composites.\u00a0 ASME IMECE Design, Materials and Manufacturing, Houston, TX, 2012.<\/li>\n
- Kim, D., Sturtvant, C., & Kwon, P. (2012) Effect of ultra-hard coatings on hole quality of carbon fiber reinforced composites (CFRP) in drilling.\u00a0 ASME IMECE Design, Materials and Manufacturing, Houston, TX, 2012.<\/li>\n
- Lei, N., Chen, Z., Kim, D., Xue, W., & Xu, J. (2012). Maskless fabrication of graphene nano-ribbons using focused-ion beam.\u00a0 ASME IMECE Micro and Nano Technology Forum, Houston, TX, 2012 (Technical report IMECE2012-88390).<\/li>\n
- Wan, Y., Kim, D., and Park, Y. (2011) \u201cMicro Electro Discharge Machining of Polymer-Carbon Nanotube Composites.\u201d\u00a0 Proceedings of International Symposium on Green Manufacturing and Applications (ISGMA 2011), Oct. 6-7, 2011, Seoul, Korea.<\/li>\n
- Park, K., Kwon, P., Kim, D., and Beal, A. (2011) \u201cStudy on tool wear in drilling of composite\/titanium stack with carbide tools.\u201d\u00a0 Proceedings of International Symposium on Green Manufacturing and Applications (ISGMA 2011), Oct. 6-7, 2011, Seoul, Korea.<\/li>\n<\/ol>\n
<\/p>\n
Non-refereed Conference Papers\/Abstracts\/Presentations <\/u><\/strong><\/p>\n\n- Kim, D., \u201cMachinability issues in drilling of CFRP\/titanium stacks,\u201d Proceedings of Korean-American Scientists and Engineers Northwest Regional Conference 2015, Boise, ID, October 10-11, 2015.<\/li>\n
- Kim, D., \u201cFocused ion beam machining of Polymethylmethacrylate(PMMA)\/Multi-Walled Carbon Nanotube(MWCNT) Nanocomposites,\u201d NSF Workshop on Advanced Manufacturing for Smart Goods, Portland, OR, May 14-15, 2015.<\/li>\n
- Cho, D.Y., Cha, J.H., Jung, H.B., Song, H.C., Kim, D. \u201cDevelopment of ship block logistics system on mobile devices,\u201d Proceedings of US-Korea Summit on Science and Engineering, San Francisco, CA, 2014.<\/li>\n
- Kim, D. \u201cHybrid GFRP Composites for Wind Turbine Blades.\u201d Proceedings of US-Korea Summit on Science and Engineering, Anaheim, CA 2012.<\/li>\n
- Kim, D. \u201cFatigue Enhancement of Interference Fit Joints in Composites.\u201d\u00a0 Proceedings of US-Korea Summit on Science and Engineering, Park City, UT 2011.<\/li>\n
- Kim, D., \u201cSolid freeform fabrication of high dense metallic products\u201d Proceedings of Korean-American Scientists and Engineers Northwest Regional Conference 2009, Bellevue, WA, 2009.<\/li>\n
- Kim, D., \u201cMachining of hybrid composites in aerospace applications\u201d Proceedings of Korean-American Scientists and Engineers Northwest Regional Conference 2007, Portland, OR, 2007.<\/li>\n
- Kim, B., Lim, B., Lee, D., Kim, D., \u201cCreep rupture strength in 9Cr-1.5Mo steels with addition of boron,\u201d Asian Pacific Conference on Fracture and Strength 2006, Sanya of Hainan Island, China, 2006.<\/li>\n
- Kim, D., Flinn, B. D., Spitsen, R., Ramulu, M., \u201cThe effects of weld quality on fatigue enhancement process for low carbon steel resistance spot welds,\u201d Proceedings of the Society of Experimental Mechanics Conference 2005 in Portland, OR, 2005.<\/li>\n
- Kim, D., Stoebe, T., \u201cManufacturing Technology Curriculum Research and Development for Community and Technical Colleges in Washington State,\u201d Proceedings of AACC\/Advanced Technological Education Conference, Contributed Paper Session, Omni Shoreham Hotel, Washington, DC, October 13-16, 2004.<\/li>\n<\/ol>\n<\/li>\n<\/ol>\n
<\/p>\n<\/p><\/div>\n<\/section>\n","protected":false},"excerpt":{"rendered":"
<\/p>\n
Publications<\/h2>\n
Refereed Journal Articles<\/strong><\/p>\nKhawarizmi, R., Kwon, P., Sayem, M. A., Han, Y., Kim, D., (2021) \u201cThe effect of carbon fiver types on tool wear during edge trimming of 0\u00b0, 45\u00b0, 90\u00b0, and 135\u00b0 carbon fiber reinforced plastic laminates,\u201d ASME Transactions Journal of Manufacturing Science and Engineering, Under review<\/em>.
Olson, W. M., Kim, D. \u201cAn Exploratory Study of Far Transfer: Understanding Writing from First-Year Composition to Engineering Writing-in-the Major Courses,\u201d Writing Across the Disciplines, Under review<\/em>.
Svinth, C. N., Wallace, S., Stephenson, D. B., Kim, D., Shin, K., Kim, H.-Y., Kim, T.-G., \u201cIdentifying abnormal CFRP holes using both unsupervised and supervised … » More …<\/span><\/a><\/p>\n","protected":false},"author":2144,"featured_media":0,"parent":0,"menu_order":2,"comment_status":"closed","ping_status":"closed","template":"template-builder.php","meta":{"_wsuwp_accessibility_report":[]},"wsuwp_university_location":[],"wsuwp_university_org":[],"_links":{"self":[{"href":"https:\/\/vancouver.labs.wsu.edu\/dave-kim\/wp-json\/wp\/v2\/pages\/10"}],"collection":[{"href":"https:\/\/vancouver.labs.wsu.edu\/dave-kim\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/vancouver.labs.wsu.edu\/dave-kim\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/vancouver.labs.wsu.edu\/dave-kim\/wp-json\/wp\/v2\/users\/2144"}],"replies":[{"embeddable":true,"href":"https:\/\/vancouver.labs.wsu.edu\/dave-kim\/wp-json\/wp\/v2\/comments?post=10"}],"version-history":[{"count":2,"href":"https:\/\/vancouver.labs.wsu.edu\/dave-kim\/wp-json\/wp\/v2\/pages\/10\/revisions"}],"predecessor-version":[{"id":17,"href":"https:\/\/vancouver.labs.wsu.edu\/dave-kim\/wp-json\/wp\/v2\/pages\/10\/revisions\/17"}],"wp:attachment":[{"href":"https:\/\/vancouver.labs.wsu.edu\/dave-kim\/wp-json\/wp\/v2\/media?parent=10"}],"wp:term":[{"taxonomy":"wsuwp_university_location","embeddable":true,"href":"https:\/\/vancouver.labs.wsu.edu\/dave-kim\/wp-json\/wp\/v2\/wsuwp_university_location?post=10"},{"taxonomy":"wsuwp_university_org","embeddable":true,"href":"https:\/\/vancouver.labs.wsu.edu\/dave-kim\/wp-json\/wp\/v2\/wsuwp_university_org?post=10"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}